Roof forming machine for making the curtain of the Shutter doors. with punching holes for making different skin of laths.
This is a fully automatic production line for the production of curtain and lathe parts of shutter doors. The machine is mainly composed of three parts. Feeding, punching, and forming. Three parts.
The feeding device is equipped with a motor. The raw material is fed into the punching device through the rotation of the motor. The width of the raw material needs to be determined according to the width of the final product.
The punching part is mainly composed of three parts: punch press, mold and private service feeding. The pressure of the punch press is 63 tons. The size of the pressure depends on the shape and size of the hole. The material of the mold is high-alloy mold steel, which is of very good quality and suitable for high-speed work. Private service feeding is used to determine the length of each feeding.
The forming part is mainly composed of forming rollers, cutting devices and controllers. The forming part is composed of many rollers. The shape of the rollers is determined by the shape of the product. The rollers are equipped with hand wheels for adjusting materials of different thicknesses. The cutting device is mainly composed of a knife and a cylinder. The cylinder drives the blade to descend. So as to achieve the purpose of cutting. The controller part mainly controls the manual working mode and automatic working mode of the machine. If the length of the product is fixed. We can use the automatic mode. If we need to produce products of different lengths, we can use the manual mode.
